LISCIO Silk Metallic is a silver coloured decorative paint producing velvet effect on walls. LISCIO Silk Metallic has unique metallic pigments that deliver elegant wall finish with velvety results in classic style. Application of LISCIO Silk Metallic flooring paint is versatile in producing different results with every tool. By using spatula, the paint delivers wonderful effects of Venetian Stucco with metallic finish, while by using a brush same product delivers fine metallic finish with sandblasted effect.

Ideal Use

Decoration of walls and interior furnishings.

Surface preparation

Clean the surface to be treated, removing all lo- ose and flaking materials. On old or powdering surfaces, it is recommended to apply a coat of the Liscio Stucco by LISCIO. On rough or irregular surfaces, screed using PA- STE SCREED FOR WALLS by LISCIO. Proceed with preparation of the base by applying one or two coats of Supercolor by LISCIO in the colour indicated in the colour chart, diluted 40% with drinkable water. Once dry, after 4 ÷ 6 hours, proceed to apply Liscio LISCIO SILK METALLIC according to the desired finish.

• ANTICO EFFECT: Apply LISCIO SILK METALLIC on the surface in an irregular fashion using a me- dium size Inox steel trowel until the whole surfa- ce has been covered. Before the product dries, pass over the surface moving the product about with the trowel in order to obtain the desired two – tone velvet effect. The application and working of the product do not create problems of joints in as much as LISCIO SILK METALLIC, smoothed over and squashed by the trowel during application, compacts itself and flattens in an even fashion between one area and another. For the shades made from colour chart we recommend that you apply as a base, a first coat of the same Liscio Silk Metallic to diluted 50% using a short haired roller. Yield 7-9 m2/l
• ANTICO EFFECT VERTICALE: Apply Liscio LISCIO SILK METALLIC in vertical or diagonal stripes using a medium sized inox steel TROWEL until the enti- re surface has been covered. Before the product dries, pass over the applied product following the same direction used in the application of the product in order to obtain the geometrical effect desired. The application and working of the product do not create problems of joints in as much as LISCIO LISCIO SILK METALLIC, once smoothed over and squashed with the trowel during application, compacts itself and flattens in an even fashion between one area and another. For the shades made from base colour Chart we reccomend that you apply as a base, a first coat of the same Ottocen- to diluted 50% using a short haired roller. Yield 7-9 m2/l
• Aged LISCIO SILK METALLIC on Fil Posè: On the Heritance Fil Posè finish, apply LISCIO SILK METALLIC diluted 20% with drinkable water, until the surface is com- pletely covered, using a brush and following the direction that the Fil Posè has been applied in. Once dry, sand down the crests of product using fine sand paper (type 150), following this, remove any dust and the traces left during the sanding. Yield 6-8 m2/l